1. Wood carving crafts should not be exposed to high temperature.
Like other works, woodcarving crafts are not suitable for high-temperature environments. Exposure will make the wood brittle and hard, and the texture will be damaged. Especially, it cannot be placed on the balcony. The window should also be next to the curtains and shade. For example, the wood of longan wood carving is hard and should be protected from sunlight. The furnishings in the room should be kept in a humid environment to prevent them from cracking. At the same time, woodcarving crafts should not be placed near open flames, fire walls, ondol and stoves.
Second, wood carving crafts should not be placed in a humid or extremely dry room [1].
In a very humid environment, some wood carving crafts will grow "hair". For example, green sandalwood crafts will spit out silver-white silk. Although it is a beautiful scenery, as far as I know, many people do not like it.
In a too dry environment, some wood carving crafts may partially crack. Moreover, people's living standards are much higher now than in the past. The simplest is that the life in the north has heating in winter and air conditioning in summer. Therefore, it is necessary to pay attention to the wood carving crafts not to blow directly at the empty withering wind. Don't put him near the heating pipe.
3. It is not advisable to wipe with a towel with water
It is not advisable to wipe with a towel with water. It is better to wipe with a waxy or oily cotton towel. Many people buy wood carving crafts and like to wipe them with a wet rag. If you often wipe with a damp rag, the water will penetrate into the wood carving, and the wood carving will gradually be damaged. Therefore, you can use a dry cotton cloth or a feather duster to dust off the wood carving crafts when cleaning. , You can use the brush to apply the glazing wax to the surface of the wood carving crafts, and then wipe and polish with a rag. Or wipe with waxy or grease-containing fabrics. According to whether the room is clean or not, often use dry cotton cloth or feather duster to dust off the woodcarving crafts to show its natural beauty. Apply glazing wax to the surface of woodcarving crafts with a brush, and wipe with a rag to polish. Of course, you can also use a cotton towel dipped in some walnut kernel oil and gently rub it on the surface of the wood carving crafts to achieve the desired effect. However, it is important not to use a towel with water to wipe, as this will make the wood carving crafts too moist, but it will not achieve the desired effect. The small pieces of mahogany often wiped will become more red and bright, and can add a quaint mood.
