Wood veneer wallboard is a very popular decoration material in recent years. There are many advantages, such as: convenient installation, easy operation, low requirements for construction personnel, and short construction period, so it is more suitable for modern young people’s fast lifestyle. But no matter how convenient the installation is, there will be problems. So what common problems will you encounter when installing wood veneer wall panels?
1. The wall is too uneven
The installation of wood veneer wallboard generally does not require treatment on the wall, but it may also encounter the situation that the wall unevenness is too large, which leads to the normal installation. You can use the following methods to process before installing the wood veneer wall.
- Multi-point bumps (the wall is wavy): wooden strips can be used to level the front to make the wall consistent, and then install the wooden veneer wallboard.
- Part of the wall is skewed: you can use a level to match the wooden strips to make points.
2. How to install the wall if it is too hard
In some buildings, the cement label is too high, or the three-mix wall (with stones) cannot be penetrated by gun nails according to the needs. At this time, use an electric hammer to punch holes and fill them with wooden blocks. The density does not need to be too large (spacing 1 meter within), install wood veneer wall panels.
3. The treatment of corners
Wall decoration will inevitably encounter corners or closings, so the quality of the installation will directly affect the overall effect. Bending at right angles, pay attention to the bending process, first draw the bending line, and then use the engraving machine to install the rounded cutter head, hollow out the back of it, and then heat to bend and shape.
4. The treatment of closing
After the wood veneer wall panel is installed, it is necessary to install the line closing to achieve the decorative effect. If the slicing of the materials is absolutely neat, the line closing is not necessary, but due to the actual installation environment and woodworking installation level and the installation style needs, the line must be closed. At this time, various corner lines need to be installed. The better closing lines are: seven sub-line closing line, sun angle line, etc., the use method is the same as that of ordinary angle line.
