There are also many types of boards on the market, which can be divided into solid wood boards, plywood boards, MDF boards, particle boards, ecological boards, fireproof boards, wood-plastic boards, etc.
1
solid wood board
Solid wood panels are wood panels made of whole wood. Durable and with a natural grain, these panels are an excellent choice for renovations. However, due to the high cost of this type of board and the high requirements for construction technology, it is not used much in decoration. Solid wood boards are generally classified according to the actual name of the board, and there is no uniform standard specification. Except that the floor and door leaves will use solid wood boards, the boards we generally use are artificially processed wood-based boards.
2
splint
Plywood is also called plywood, and it is commonly known as thin core board in the industry. It is made of three or more layers of 1mm-thick veneer or sheet glued by hot pressing. It is the most commonly used material for handmade furniture. Splints are generally divided into six specifications: 3mm, 5mm, 9mm, 12mm, 15mm and 18mm (1mm is 1mm). Plywood is made of more than three layers of veneers glued together, which can be divided into two types: broad-leaved wood glued plywood and coniferous wood glued plywood.
3
MDF
Density board, also known as fiberboard, is an artificial board made of wood fiber or other plant fiber with urea-formaldehyde resin or other suitable adhesives. According to its density, it can be divided into high-density board, medium-density board and low-density board. . MDF is also easy to reprocess due to its softness and impact resistance. In foreign countries, density board is a good material for making furniture, but because the national standard for density board is several times lower than the international standard, the quality of density board in our country needs to be improved.
4
particle board
Particleboard is a thin board made of wood scraps as the main raw material, then infiltrated with glue and additives. According to the pressing method, it can be divided into two types: extruded particleboard and flat-pressed particleboard. The main advantage of this type of board is that it is extremely cheap. Its shortcomings are also obvious: the strength is extremely poor. It is generally not suitable for making larger furniture or furniture with mechanical requirements.
5
Ecological board
Eco-board is also called melamine veneer, its full name is melamine impregnated film paper veneer wood-based panel. It is a decorative board made by soaking paper with different colors or textures in melamine resin adhesive, then drying to a certain degree of curing, paving it on the surface of particleboard, medium density fiberboard or hard fiberboard, and hot pressing.
6
Fireproof board
Fireproof board is a decorative board made of silicon material or calcium material as the main raw material, mixed with a certain proportion of fiber material, lightweight aggregate, adhesive and chemical additives, and made by autoclaving technology. It is more and more used A new type of material, its use is not only because of the fire protection factor. The construction of fireproof boards has relatively high requirements for pasting glue, and the price of better quality fireproof boards is also more expensive than decorative panels. According to the definition and classification analysis of the board industry, the thickness of the fire board is generally 0.8mm, 1.0mm and 1.2mm.
7
WPC
Wood-plastic panels use hot-melt plastics, including polyethylene, polypropylene, and polyvinyl chloride as adhesives, and use wood powder such as wood, agricultural plant straw, and agricultural plant shell powder as fillers. High-tech products produced. The tensile strength, flexural strength, flexural modulus, impact strength, and Vicat softening temperature of its products all reach or exceed international advanced standards