Installation method of wood veneer wall panel
1. What are the installation methods of wood veneer wall panels?
There are currently three main methods for installing wood veneer wall panels: installation with air nails, dry hanging, and gluing.
1. Install with air nails
The biggest disadvantage of air nail installation is that it needs to patch the nail holes, which cannot be standardized. The installation quality of the veneer depends very much on the quality and working attitude of the workers and painters. In addition, the work site needs to have an air compressor and power supply, otherwise the construction will not be possible. After the veneer is installed for several years, it is prone to the nail hole repair layer falling off, or the veneer warping due to loose nails.
2. Dry hanging method
Also known as empty hanging method. In this method, the decorative panel is directly hung on the wall or empty on the steel frame using metal pendants and does not need to be glued. The principle is to set the main force point on the main structure, and fix the plate on the building through the metal pendant to form the wooden decorative wall.
3. Adhesive method
Compare with the dry hanging method. The most commonly used method, the gluing method is in the later stage of decoration. After the ground is completed, use glue + hanging code strips to install decorative panels on the base layer (the on-site decoration personnel have already done a good job in the early stage of decoration and completed the processes such as leveling the vertical plane. baseboard). The dry hanging method requires the necessary vertical adjustment work when installing the decorative panel, thereby reducing the work speed. Especially when working hours are tight, it is not conducive to rushing to work. The decorative panel is installed by the adhesive method, which avoids the trouble of maintenance and reworks in the future. It also minimizes the man-made damage to the decorative panel caused by each link in the decoration process.
Second, what are the advantages and disadvantages of wood veneer wall panels?
advantage:
1. Reduce noise and promote sleep quality. It produces a perfect slow reflection of sound, effectively buffers the impact of heavy bass, and the material itself absorbs bad sound sharp waves, thus forming a perfect three-level noise reduction function in space, greatly improving sleep for one-third of life quality.
2. Wood can adjust the moisture in the air. When the water vapor pressure in the air is greater than the water vapor pressure of the wood, the wood absorbs moisture from the air, which is moisture absorption. The opposite is desorption. Wood adjusts the moisture in the air through its breathing. Effectively relieve physical fatigue.
3. It has a wide range of applications. It has a natural and delicate wood grain texture and is a natural good material that cannot be replaced by any other material. Ingenious application of wood veneer material, to make better use of every inch of space, so that the interior decoration style is highly unified, showing the atmosphere of the wind, reflecting the high taste of the owner. It is no exaggeration to call wood veneer the “killer” of a luxury home.
shortcoming:
1. Some wood veneer materials are not durable enough. For example, rubber wood has a peculiar smell, and is prone to discoloration, decay, and moth-eaten due to its high sugar content. It is not easy to dry, not wear-resistant, easy to crack, easy to bend and deform, easy to process wood, and easy to deform in plate processing.
2. After many oaks are dehydrated, they are no longer suitable for use as furniture materials due to bending deformation. However, because oak wood is more expensive, many manufacturers still use this deformed wood to make furniture.
