Solid wood doors have natural environmental protection characteristics, and solid wood doors are used more in home decoration. Solid wood doors use lignin, one of the main chemical components of raw wood, which has a strong absorption effect on ultraviolet rays. The fine unevenness of the wood surface structure can scatter light and reduce eye fatigue and damage. Next, I will introduce the installation standards of solid wood doors.
1. Door cover installation standard
The assembly and connection of the door cover should be tight, flat and free of black seams; pay attention to alignment when installing the door cover diagonal, and the error range should be within 1mm (within 2 meters) and 1.5mm (above 2 meters). The door cover should be installed horizontally and vertically, with a verticality of 2mm and a horizontal straightness of 1mm.
2. Thread installation standard
The sleeve line should be fixed with glue on the door sleeve and wall, and the interface should be flat and tight. After the installation is completed, you can see if it is in the same plane with the side sleeve line. The curvature of the sleeve can only allow an error of 1mm.
3. Door leaf installation standards
The door leaf should be installed flat and vertical. In addition, the door leaf and the door cover should be flat, the lower gap between the door cover and the door leaf should be 6 to 7mm, and the door leaf should be tightly integrated with the sealing strip, and no swinging phenomenon can occur.
4. Hardware fitting installation standards
For the installation of solid wood door hardware accessories, the hinge should be vertical and flat, and the size of the notch should be the same as that of the hinge; the door lock slot should be accurate and standardized; the connectors and lock lights should be flexible, and the surface should be smooth and smooth.
