In the application of ecological panels, it is generally recommended to repaint after three to five years of painting, and the same kind of paint that was originally used can be used. Before painting, in addition to removing dirt, it is also necessary to sand with water sandpaper, dip a little warm water to gently remove the remaining oil stains on the surface of the board, and also remove the small paint particles left by the last painting. After sanding is complete, wipe the surface with a clean rag so that it can be repainted.
Before waxing, the ecological board factory said that the dust should be removed first, and then use a clean rag to dip in the wax, starting from the corner of the board, and wipe it on the board in a circular shape. Only by paying attention to daily maintenance can it be used more Long. If the place where the ecological board is stored after production is relatively humid, deformation will also occur. Therefore, when choosing a place to place the ecological board, you must choose a dry and ventilated place.
For the dirt that cannot be wiped off the paulownia ecological board, use a cotton cloth that is not easy to depilate, dipped in a mixture of white electric oil and water to clean it, and then use a cotton cloth dipped in an appropriate amount of water to clean it, and wipe it dry immediately after cleaning. Use a small amount of alcohol to clean the objects, and then wipe them with a mild detergent and a damp cloth. Tea, coffee, and super glue can be wiped with toluene solvent.