In furniture decoration, wood can be seen everywhere, and boards of various materials are often used in decoration. Many people are concerned about the wide variety of boards with different materials on the market. Buying and decorating wood is a big problem when decorating. Consumers are traumatized by the choice of wood.
► 1. Is the plywood authentic?
Manufacturers mostly counterfeit domestic boards as import boards, and sell low-grade boards as high-grade boards. When buying a board, the user must first recognize the trademark, factory address, grade and anti-counterfeiting mark on the entire package. If it is true, then check the quality. There are many burrs around the poor board, while the authentic board is neat and smooth, and the sandwich is well-proportioned and dense. It is flat and uniform in brilliance, with few knots and joints. Particleboard, medium-density board and Sabile board are also available in various thicknesses and grades, and prices vary greatly. The good board is not only thick but also compact in density, and it is not easy to swell and deform in water.
► 2. Is the quality of the log wood reliable?
At present, counterfeit logs are flooding in the market, especially in rural markets. The methods used can be described as various. Some are selling the Chinese fir produced in Jiangxi and Hunan as Guizhou fir, and Pinus sylvestris are pretending to be red hemlock and Douglas fir. The ruler pretends to be a ruler. Consumers should lift off the "fake foreign devils" when buying, see through the face of "selling dog meat", and then buy after confirming the authenticity of the product. The finished wood should be a high-quality material that has been dried, without bending, deforming, breaking and decay, with small wood grain slope, no resin marks, white spots and honeycomb holes, and small and few knots.
► 3. Are the timber semi-finished products the same?
Some unscrupulous manufacturers use the machine that people like to buy semi-finished wood that is not painted, mixed with fake materials, good materials for the surface, poor materials for the back and interlayer, and even more so that you can see that the sample is good, and the delivery is bad. This is more false on wooden floors, wooden doors (wooden doors and windows information), wooden wall skirts, wooden moldings, grilles, etc. When purchasing such goods, users must check carefully, not only the inside and outside must be consistent, but also the outer surface layer and the inner core, especially the bundled lines and floor, to prevent short materials in the middle and poor materials. Doors and windows should be processed finely and firmly joined. Tenon joints should be used more, and nails should be used less. The angle between the thin plates is door wrap wire or solid wood wrap wire, and the wood section is not exposed, and the bound wood cannot be seen.
