The veneer is a kind of wood decoration material that is widely used at present. This kind of wood veneer is made of different natural veneer pastes through hot pressing. Because of the wide variety of decorative panels, diverse styles, convenient construction, and other reasons, they are deeply favored by people. So, let me introduce you to what wood veneer panels are and the main items of wood veneer installation.
What is wood veneer
Wood veneer panel is a kind of decorative material made by adhering natural solid wood to the surface of plywood through hot pressing, and then beautifying the log in a scientific way to meet the demand of modern society for the use of wood. The new type of wood product. Wood veneers are mainly made of natural ordinary wood or artificially planted fast-growing forests as raw materials, which are processed and processed, similar to natural precious veneers, with special textures and colors designed according to requirements.
Precautions for installation of wood veneer panels
1. During the construction of wood veneer panels, ventilation should be carried out first, and attention should be paid to moisture-proof. Before use, use fine sandpaper to clean up the dust and impurities on the surface of the veneer. The dust and impurities on the surface can be swept away with soft feathers.
2. You can use varnish to paint the surface of the veneer, and let it dry for 30-60 minutes after the paint is dry. After the paint is dry, sand the veneer with sandpaper, and then brush the second layer of primer for sanding. Before the wood veneer construction, at least brush Primer three times.
3. After the construction of the wood veneer panel is completed, peptide paint should be applied twice to fill the nail holes. The standard is that the nail holes cannot be seen within 1 meter. At present, some decoration companies will use the method of applying strong glue to the bottom of the veneer instead of nailing. This method can obtain a higher decorative effect. There is no need to nail holes to fill the ash, but the cost is higher.
4. After the ash filling is completed, continue to brush the peptide paint, sand the finish with sandpaper once, and then color and repair the local nail holes.
5. You can polish the finish with clean water 2-3 times until no obvious traces of oil brushing are seen.
6. Carry out the third nitro topcoat, which is mainly used to maintain and expand the finish and improve the smoothness of the surface.
7. Finally, carry out paper skin protection, because wood veneer panels are not suitable for direct sunlight and damp, dry places, otherwise problems such as mildew and discoloration will occur.
